Email this article Peer Reviewed Open Access
This paper is reviewed in accordance with the Peer Review Program of IRA Academico Research
Selected Al Alloy and Analyses of its Decrease Machinability
Abstract
Aluminum alloys are frequently subjected to machining process and for this process is important their machinability, which depends on many factors. The Faculty of Production Technology and Management is often asked by companies with a request to solve a specific technical tasks. One of these tasks was the analysis of one specific aluminum alloy bath with worsened machinability. The rods from this alloy exhibited against assumption significantly worse chips during machining. That meant, of course, bad situation in area of machining tools. At the faculty were done analysis that could contribute to identifying the cause of the worsened machinability.
Keywords
alloy, aluminum, structure, analyses.
Full Text:
PDF©IRA Academico Research & its authors
This article is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. This article can be used for non-commercial purposes. Mentioning of the publication source is mandatory while referring this article in any future works.
This article is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. This article can be used for non-commercial purposes. Mentioning of the publication source is mandatory while referring this article in any future works.
