Peer Reviewed Open Access

This paper is reviewed in accordance with the Peer Review Program of IRA Academico Research


Method for Determining the Optimum Insulation Thickness of the Plaster Tow Material: Influence of the Heat Exchange Coefficient in Transient Regime

Papa Touty TRAORE, Fatimata BA, Babou DIONE, Moussa DIENG
Abstract
In this paper, we have applied a numerical method to determine the optimum insulation thickness of the tow plaster plane material. The influence of the exchange coefficients at the level of the two faces of the material has been highlighted. The optimum insulation thickness of the material is at the area where the thermal resistance value of the material is the maximum. We added the relative thermal resistance to show how the optimum insulation thickness changes when the exchange coefficients change values.
Keywords
Optimal thickness, Insulation, Heat exchange coefficient, Thermal resistance
Full Text:
PDF
References

Kon, Okan. (2017). Determination of optimum insulation thicknesses using economical analyse for exterior walls of buildings with different masses. An International Journal of Optimization and Control: Theories & Applications (IJOCTA) 7, no. 2, 149-157

Y. Traore, E.B. Diaw, I. Diagne, M.B. Ndiaye, S. Tamba, B. Fleur, M. Dieng, A.K. Diallo And G. Sissoko (2016). Characterization Phenomena of Thermal Transfer through an Insulating Material Kapok Plaster Starting from Dynamic Impedance Method -Research Journal of Applied Sciences, Engineering and Technology. Maxwell Scientifique Publication Corp 12, n° 7, 712-715.

H. L. Diallo, B. Dieng, I. Ly, M. M. Dione, M. Ndiaye O. H. Lemrabott, Z. N. Bako, A. Wereme and G. Sissoko (2012). Determination of the recombination and electrical parameters of a vertical multijunction silicon solar cell. Research Journal of Applied Sciences, Engineering and Technology 6, 1-6

I. K. Toure, M. S. O. Brahim, A. Diouf, M. Dieng, A. k. Diallo, B. Fleur, Y. Traore, I. Diagne, M. Wade, G. Sissoko (2016). ‘Spectroscopic Analysis of Thermal Behaviour of Kapok-Plaster Material in Dynamic Frequency Regime Established- International Journal of Mechanical Engineering - ISSN 2321- 6441, Volume 4, Issue 7.

M. Dieng, I. Diagne, B. Fleur, A. Kane, M.L. Sow, F. Niang and G. Sissoko (2012). Study of heat transfer in a kapok material from the convective heat transfer coefficient and the excitation pulse of solicitations external climatic- Research Journal of Applied Sciences, Engineering and Technology-Maxwell Scientific Organization. ISSN: 2040-7459; e-ISSN: 2040-7467.pp, 1960- 1962.

A. K. Diallo, M. Boukar, M. B. Ndiaye, A. Diene, P. Demba, I. Diagne, M. S. O. Brahim and G. Sissoko (2014); Study of the equivalent electrical capacity of a thermal insulating kapok-plaster material in frequency dynamic regime established-Research Journal of Applied Sciences, Engineering and Technology-Maxwell Scientific Organization, ISSN: 2040-7459; e-ISSN: 2040-7467.pp,2141- 2145.

A. Diouf, I. Diagne, M.S. OulBrahim, M.L. Sow, F. Niang and G. Sissoko (2012). Study in Cylindrical Coordinates of the Heat Transfer Through a Tow Material-Thermal Impedance Research Journal of Applied Sciences, Engineering and Technology-Maxwell Scientific Organization. ISSN: 2040-7459; e-ISSN: 2040-7467.pp, 159-5163.

J.C. Batsale, A. Degiovanni, (1994). Mesure de résistance thermique de plaque mincesà l’aide d’une min-plaque chaude, Rev. Gen. Therm. 390-39.

E. K. M. Abdelgadir, A.M. H. Adam, O. Younis, A. K. Hussein (2019). Optimum Thermal Insulation Thickness for Building Under Different Climate Regions -A Review Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 59, Issue 2254-268

D., Naouel. (2011). A study on optimum insulation thickness in walls and energy savings in Tunisian buildings based on analytical calculation of cooling and heating transmission loads. Applied Energy 88, no. 1 156-164.



©IRA Academico Research & its authors
This article is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. This article can be used for non-commercial purposes. Mentioning of the publication source is mandatory while referring this article in any future works.